Whacker Rammer BS50 BS60 BS70 BS500 BS600 BS700 BS65 BS650 DS70 DS720 Repair Manual

* Foreword
* 1Safety Information
* 1.1Signal Words Found in this Manual
* 1.2Machine Description and Intended Use
* 1.3Operating Safety
* 1.4Operator Safety while using Internal Combustion Engines
* 1.5Service Safety
* 2Tools
* 2.1Recommended Special Tools
* 3Maintenance Schedules
* 3.1Periodic Maintenance Schedule (BS 50/60/70-2, BS 65)
* 3.2Periodic Maintenance Schedule (BS 500/600/700/650)
* 3.3Periodic Maintenance Schedule (BS 50/60/70-2i)
* 3.4Periodic Maintenance Schedule (BS 500/600/700-oi)
* 3.5Periodic Maintenance Schedule (DS 70)
* 3.6Periodic Maintenance Schedule (DS 720)
* 4Engine and Upper Machine Components
* 4.1Removing the Silencing Cover
* 4.2Replacing the Throttle Control (2010 and later 2-stroke models)
* 4.3Replacing the Throttle Control (2010 4-stroke models)
* 4.4Throttle Control (pre-2010 models)
* 4.5Replacing the Stop Switch (2010 and later 2-stroke models)
* 4.6Replacing the Stop Switch (2010 and later 4-stroke models)
* 4.7Replacing the Guide Handle (2010 and later 2-stroke models)
* 4.8Replacing the Guide Handle (2010 and later 4-stroke models)
* 4.9Replacing the Guide Handle (pre-2010 models)
* 4.10Shock Mounts
* 4.11Tillotson Carburetor (BS 500/600/700/650 only)
* 4.12Fuel Lines (BS 50/60/70-2, BS 65)
* 4.13Fuel Tank (BS Models)
* 4.14Fuel Tank (DS Models)
* 4.15Fuel Tank Cap
* 4.16Muffler (pre-2009 BS Models)
* 4.17Engine Cooling Fins
* 4.18Muffler (DS Models)
* 4.19Replacing the Carburetor (WM 80 engines)
* 4.20Replacing the WM 80 Engine (2010 and later models)
* 4.21Replacing the WM 80 Engine (pre-2010 models)
* 4.22Replacing the Carburetor (WM 100 Engines)
* 4.23Replacing the WM 100 Engine
* 4.24Removing the WM 90 Engine
* 4.25Engine (DS Models)
* 4.26Clutch (2- and 4-stroke models)
* 4.27Clutch (DS 720 only)
* 4.28Clutch (DS 70 only)
* 5Ramming System
* 5.2Replacing the Ramming Shoe
* 5.3Spring System Cover Removal and Installation
* 5.4Spring System
* 5.5Inspecting the Spring System
* 5.6Protective Pipe
* 5.7Ramming System Lubrication (BS 500/600/700/650, DS 720)
* 5.8Ramming System Lubrication (BS 50/60/70, BS 65, DS 70)
* 6Crankcase
* 6.1Crank Gear and Connecting Rod
* 7Oil Injection (if equipped)
* 7.1Testing the Float Switch (2010 and later models)
* 7.2Replacing the Float Switch (2010 and later models)
* 7.3Float Switch Testing and Replacement (pre-2010 models)
* 7.4Oil Line Check Valve
* 8Low Oil Shutdown (if equipped)
* 8.1Testing the Low Oil Unit
* 9Troubleshooting
* 9.1Engine Hard to Start
* 9.2Engine Does Not Start
* 9.3Engine Does Not Accelerate or Runs Poorly
* 9.4Engine Overheats
* 9.5Rammer Does Not Tamp
* 9.6Rammer Jumps Erratically
* 10Technical Data
* 10.1BS 50-2
* 10.2BS 50-4
* 10.3BS 500
* 10.4BS 500S
* 10.5BS 50-2i
* 10.6BS 500-oi
* 10.7BS 60/70-2
* 10.8BS 60-4
* 10.9BS 600/700
* 10.10BS 600S
* 10.11BS 60/70-2i
* 10.12BS 600/700-oi
* 10.13BS 600/700 High Altitude
* 10.14BS 65-V
* 10.15BS 650
Tags: Whacker Rammer BS50 BS60 BS70 BS500 BS600 BS700 BS65 BS650 DS70 DS720 Repair Manual