Euro Pro ,473, 377B, 374, 373, 372, 372H sewing machine manu

Automated PDF to Text preview page 4 to 6:

Contents
Principal parts How to connect the machine to the power supply How to use the foot control How to replace the sewing lamp Changing the needle Thread and needle chart To select a suitable needle Removing and attaching the presser foot Regulating the thread tension

3-4 4 4 4 5 5 5 6 6 7 7-8 8 9 9 10 11 11 12 12 12 13 13 13 14 15 14-15 15 16 16 17 17 17 18 18 19 20

Reverse stitch The pattern selector Removing the bobbin case and bobbin Winding the bobbin Threading the bobbin case Threading the needle Drawing up the bobbin thread Straight stitch and zigzag stitch Changing sewing direction Fastening seams

Triple stretch stitch
Tricot zigzag stitch

Smocking stitch
Overlock stitch
Double action stitch
Double overlock stitch

Sewing buttonholes

Sewing zippers Hemming Sewing blind hems Sewing embroidery

Darning plate Buttons Cleaning the feed dog Cleaning the shuttle race Free arm sewing Trouble shooting: causes and remedies

2

1

2

3 17 4 5

PRINCIPAL PARTS ( Model 377B )
1.Bobbin winder thread guide 2.Thread tension dial 3.Pattern selector dial

15 14

6

4.Bobbin winder spindle 5.Bobbin winder stopper 6.Balance wheel 7.Stitch length dial 8.Reverse button 9.Needle clamp and screw

7 8

16

10.Shuttle cover

13 12 11

11.Presser foot 12.Presser foot thumb screw 13.Needle 14.Screw for face plate 15.Face plate 16.Extension table 17.Stitch display 18.Presser foot lifter

(Accessories storage compartment)

10

9

18

PRINCIPAL PARTS ( Model 374 )
1.Bobbin winder thread guide 2.Thread tension dial 3.Pattern selector dial 4.Bobbin winder spindle 5.Bobbin winder stopper 6.Balance wheel 7.Stitch length dial 8.Reverse button 9.Needle clamp and screw

10.Shuttle cover 11.Presser foot 12.Presser foot thumb screw 13.Needle 14.Screw for face plate 15.Face plate 16.Extension table 17.Stitch display
(Accessories storage compartment)

18.Presser foot lifter

3

English

PRINCIPAL PARTS ( 473/373/372/372H)
1.Bobbin winder thread guide 2.Thread tension dial 3.Pattern selector dial 4.Bobbin winder spindle 5.Bobbin winder stopper 6.Balance wheel 7.Stitch display 8.Reverse button 9.Needle clamp and screw

10.Shuttle cover 11.Presser foot 12.Presser foot thumb screw 13.Needle 14.Screw for face plate 15.Face plate 16.Extension table 17.Presser foot lifter

(Accessories storage compartment)

HOW TO CONNECT THE MACHINE TO THE POWER SUPPLY
1.Fit the machine plug into the machine. 2.Plug the power cord to the power supply. Note:*Before plugging in the machine, ensure the voltage and number of cycles indicated, conforms to your electrical power supply.

Switch

HOW TO USE THE FOOT CONTROL
Sewing speed can be varied by the foot control. The harder you press on the controller, the faster the machine runs. Note:*By releasing the controller, the machine stops running automatically. *Before using the machine, practice controlling the speed without threading.

HOW TO REPLACE THE SEWING LAMP
The sewing lamp is located behind the face plate. Remove the face plate by loosing the screw of the face plate. Bulb type: To remove...Unscrew To replace...Screw Note:*Before replacing a bulb, disconnect the machine from the power supply. *Bulbs are available from sewing machine retailers.(Use a 15-Watt bulb)
Before leaving the machine, changing parts or doing any other work on it, always disconnect the plug from the wall socket.

Caution!

4