MTD Cub Cadet 1000, 1500 series tractor service manual

Automated PDF to Text preview page 4 to 6:

2

Series 1000 and 1500

Series 1000 and 1500
1. INTRODUCTION 1.5. Refer to the table provided for engine applications in the 1000 series range. See Figure 1.5.

1000 Series Engine Applications Year Model # Factory # Engine 2001 1027 13A-328-101 9.0 HP BS 1170 13CD608G101 17.5 HP BS 1180 13AT608H101 18 HP BS 1212 14AJ808H101 21 HP BS 2002 1027 1170 1515 1517 1525 1527 1529 13A-328-101 13CD608G101 13A-201F100 13A-231G100 9.0 HP BS 17.5 HP BS 15 HP KOH 17 HP KOH

Disclaimer: This service manual is intended to be used by trained technicians. Disclaimer: The information contained in this manual is current and accurate at the time of writing, but is subject to change without notice. 1.1. · Intent: This manual is intended to: Provide specific service and repair procedures for a range of Cub Cadet 1000 and 1500 Series tractors manufactured for the 2005/2006 season. Highlight significant changes to the Cub Cadet 1000 Series since it's introduction. Engines: A variety of single cylinder and V-twin engines have been used in the 1000 series tractors. Kohler Courage line of single-cylinder and V-Twin engines is presently the most heavily used power source in the 1000 Series line For specific engine service information, refer to the engine manufacturer's service publications. The engine is partially identified by the 4th digit of the factory number: 13AX11CG756 - Kohler Courage single cylinder 13AP11CP756 - Kohler courage V-Twin

2003

13A-221F100 15 HP KAW 13A-241G100 17 HP KAW 13A-261H100 19 HP KAW 13AL11CG710 18.5 HP BS 13AB11CH710 22 HP BS 13AR11CP710 24 HP BS 14AB13CH710 22 HP BS 19 HP KOH 20 HP KOH 23 HP KOH 26 HP KOH 27 HP KOH 19 HP HOH 20 HP KOH 23 HP KOH 25 HP KOH 27 HP KOH

2004 LT 1018 LT 1022 LT 1024 GT 1222

· 1.2.

2005 LT 1042 13BX11CG710 LT 1045 13AX11CH710 LT 1046 13AP11CH710 LT 1050 13AQ11CP710 SLT 1554 13AK11CK710 2006 LT 1042 13AX11CG756 LT 1045 13AX11CH756 LT 1050 13AP11CP756 SLT 1550 13AQ11BP756 GT 1554 14AK13BK756
Figure 1.5

1.3. 1.4. · ·

1

Series 1000 and 1500
1.6. Decks: Cutting decks ranging in width from 38" to 54" have been used on the 1000 Series platform. There have been multiple versions of some decks, most particularly the 42". Check the serial number when researching for parts or service information. The deck size is identified by the 8th digit of the factory number: See Figure 1.8. 1.9. Drive Systems: A variety of hydrostatic and CVT drive systems have been used on the 1000 Series tractors.

1.7.

1.8.

1.10. A Two-belt CVT system driving an MTD singlespeed transaxle is presently used only on the LT1040 model. This system can be distinguished by the gear selector (F-N-R) on the left rear fender, and the simple drive pedal. See Figure 1.10.

Year 2001

1000 Series Deck Applications Width Deck Deck/PTO Belts 27.5" CYB/STD 754-0754 42" G 754-0472 46" H 754-0349/754-0476 27.5" 42" 38" 42" 38" 42" 46" 42" 46" 50" 42" 46" 50" 54" 42" 46" 50" 54" CYB/STD G F G F G H G H P G H P K G H P K
Figure 1.8

2002

754-0754 754-0472 754-0641 754-0645/754-0644 754-0641 754-0645/754-0644 754-04011
Figure 1.10

2003

2004

754-0498/754-0499 754-04033 754-04048 754-04060B 754-04033 754-04077 754-0642 754-0349 754-0349 754-0349 754-0349

2005

1.11. A similar two-belt CVT system was employed to drive a heavy-duty transaxle in some 2002 and 2002 models having two forward speed ranges. These are easy to identify by the presence of the gear selector lever between the operators knees rather than on the fender. 1.12. All CVT driven 1000 and 1500 Series tractors have a gear selector lever and a drive pedal on the right side, near the brake pedal. 1.13. All Hydrostatic transaxles on the 1000 and 1500 Series are operated by a rocker pedal on the right side, near the brake pedal. 1.14. A Hydro-Gear 310-0510 hydrostatic transaxle is used on LT models having 20" rear tires. Hydrostatic transaxles have a rocker pedal to control forward and reverse direction and speed.

2006

· · · · ·

13AX11CG756 - 42" 2-blade deck 13AX11CH756 - 46" 3-blade deck 13AP11CP756 - 50" 3-blade deck 13AQ11BP756 - 50" 3-blade deck 14AK13BK756 - 54" 3-blade deck

2