Manual Guide of Car2PC-HON1 Adapter. Part of content: This Car2PC-HON1 adapter manual guide is for Car PC/laptop integration into car stereo and AUX Interface for MP3 player. Before do the installation steps, make sure to do the preparation steps at first. Turn off car engine and remove key from ignition. Then, un-mount your radio from the dash in order to get access to the back side of the radio.

Next steps are adapter installation:
- Attach square 14 pins connector to the back of the Honda stereo.
- Find a place where you can place Car2PC. In many cars there is enough room in the dash to place Car2PC.
Note: Make sure you mount Car2PC in a place with enough room so when you mount the car stereo back you do not break the adapter
- You may use glove box or other spaces in a dash to direct USB+ Audio cables out
- Mount your car stereo back into the dash, make sure its clips are securely fastened
- Now you can turn you car stereo on and switch it over to CD Changer mode. It should show Disk 1, Track 01 on a display.
Now you have installed Car2PC-HON1 adapter and you may use it right away with your PC/laptop. Next is driver installation steps.