Sold by kingrat502 on Tradebit The world's largest download marketplace 2,999,533 satisfied buyers
CANON PIXMA IP4900 IP4950 SERVICE TOOL INK ABSORBER FULL FIX
CANON SERVICE TOOL
PIXMA IP4500,IP4700,IP4900,IP4950 +MORE models
*fix ink absorber full on Canon Pixma
*IP and MP PIXMA SERIES
- power OFF the printer bu Power button. Dont disconnect power cable
- connect the printer by USB cable to the PC.
- press and hold Resume button (red triangle in the red circle) and press Power button
- hold both buttons until power on indicator will light then release resume button (dont release Power button) and press Resume button 5 times
- release all buttons - the printer will blink few times with green light and will then light green constantly. You have put the printer in Service Mode now and you can now run the Service Tool. (If the printer is still blinking by green - you have some other errors in printer and you have to fix them first, because the Service Tool will not work if the printer is not put in service mode - green light is constant)
4. Run the Servicetools V3400.exe program.
5. Select the connected USB port number from USB PORT
6. In the Ink Absorber Counter section of the Service Tool, select MAIN from the Absorber pull-down menu.
7. From the Counter Value() pull-down menu, select the value (in 10 increments) which is the closest to the actual counter value confirmed before replacement of the logic board, and click SET.
Print EEPROM information to confirm that the value is properly set to the EEPROM
garanteed to get printer running again!!
This file is sold by kingrat502, an independent seller on Tradebit.