$17.95

Download Now
Sold by manualsmanualsmanuals on Tradebit
The world's largest download marketplace
3,018,814 satisfied buyers
Shopper Award

Same Dorado S V 70 75 90 100 Tractor Workshop Service Repair Manual - DOWNLOAD

This is the Complete Factory Same Dorado S & V 70 75 90 100 Tractors Workshop Service Repair Manual.

The following tractors are covered in this manual:
Dorado S 70
Dorado S 75
Dorado S 90
Dorado S 100
Dorado V 70
Dorado V 75
Dorado V 90
Dorado V 100

The purpose of this workshop manual is to provide instruction for repair technicians and a practical guide to improving the quality of repairs. This manual enables repair technicians to acquire a thorough knowledge of the machine, indicating the correct methods for fault diagnosis, for working in safety and for accurate dimensional checks and visual inspections. The instructions also indicate the products to use, the tightening torques and the adjustment data.

This irreplaceable technical manual includes instructions to maintain and service your tractor using detailed diagrams and manufacturers specifications.

Navigation is simple with chapter bookmarks and ability to search by keyword.

* INSTANT DOWNLOAD - NO WAITING
* LANGUAGE: English
* FORMAT: PDF
* PAGES: 775
* COMPATIBLE: All Versions of Windows & Mac
* SEARCHABLE - BOOKMARKED - INDEXED

Completely Bookmarked chapters for easy navigation that allow you to identify the service repair procedures in the quickest time possible.

Comprehensive illustrations, exploded diagrams, drawings and photos guide you through the service repair procedures.

This manual is Indexed, Bookmarked and Searchable.
______________________________________

HOW THE MANUAL IS STRUCTURED:

Section 00 Contains the general safety rules, information on how to use and update the manual, the symbols used, the products required, the standard tightening torques and a conversion table for units of measurement.

Section 10 Contains technical descriptions and information regarding the mechanical and hydraulic operation of machine components, the designations of the various components, hydraulic diagrams and general technical data.

Section 20 Contains a guide to the use of the necessary software for machine and engine configuration and for diagnostic.

Section 30 Contains the methods, checks and adjustments regarding the external components; the operations dealt with in this section do not require removal of the various assemblies that form the tractor frame and cab.

Section 40 Contains information and diagrams regarding the machine's electrical and electronic systems.

PLEASE NOTE: This manual does not contain the engine sections.
______________________________________

CONTENTS:

SECTION 00:
Introduction
Safety
Lifting Instructions
How The Manual Is Structured
How To Consult The Manual
How To Use & Update The Manual
Standard Tightening Torques
Threadlockers, Adhesives, Sealants & Lubricants
Conversion Factors

SECTION 10:
1. TRANSMISSION ................................................................. 1
INTRODUCTION.................................................................. 1
DESCRIPTION..................................................................... 2
1.1 HOUSING...................................................................... 3
1.2 HML ASSEMBLY........................................................... 4
1.3 GEARBOX & SHUTTLE ASSEMBLY (Version with HML) ........................................................ 5
1.4 GEARBOX & SHUTTLE ASSEMBLY (Version without HML) ................................................... 6
1.5 CONTROL ROD FOR SHUTTLE - UNDERDRIVE ......... 7
1.6 SPEED CONTROL ROD................................................ 8
1.7 RANGE & PARKING BRAKE ASSEMBLY................ 9
1.8 RANGE CONTROL ROD & PARKING BRAKE LEVER............................................................. 10
1.9 FOUR-WHEEL DRIVE ENGAGEMENT ASSEMBLY.... 11
1.10 DIFFERENTIAL ASSEMBLY...................................... 12
1.11 BRAKES & REAR AXLE ASSEMBLY (Narrow version) ......................................................... 13
1.12 BRAKES & REAR AXLE ASSEMBLY (Wide version)............................................................. 14
2. REAR PTO......................................................................... 15
2.1 PTO CONTROL CLUTCH ASSEMBLY........................ 16
2.2 2-SPEED PTO ............................................................ 19
2.3 2-SPEED PTO & SYNCRO PTO............................. 20
2.4 3-SPEED PTO ............................................................ 21
3. FRONT AXLE..................................................................... 23
3.1 FRONT AXLE (4WD version) ....................................... 23
4. FRONT PTO & LIFT ..................................................... 27
4.1 FRONT LIFT ................................................................ 27
4.2 FRONT PTO ................................................................ 31
5. HYDRAULIC SYSTEM..................................................... 39
DESCRIPTION................................................................... 39
5.1 HYDRAULIC DIAGRAM............................................... 40
5.2 STEERING CIRCUIT GEAR PUMP.............................. 45
5.3 LIFT CIRCUIT GEAR PUMP........................................ 46
5.4 POWER STEERING..................................................... 48
5.5 HML SOLENOID VALVE ASSEMBLY.......................... 49
5.6 AUXILIARY SERVICES CONTROL VALVE.................. 50
5.7 HYDRAULIC 3-POINT LINKAGE CONTROL VALVE... 53
5.8 SERVICES SOLENOID VALVE ASSEMBLY ................ 54
5.9 TRAILER BRAKING VALVE ......................................... 55
5.10 LIFT CONTROL VALVE ............................................. 59

SECTION 20
1. DIAGNOSIS TOOLS ........................................................... 1
1.1 ALL ROUND TESTER ......................................................... 1
1.1.1 DESCRIPTION OF THE KIT....................................... 1
1.1.2 NOTES ON CORRECT USE ...................................... 2
1.1.3 DESCRIPTION OF THE TESTER............................... 2
1.1.4 GENERAL NOTES ON CONNECTING & POWERING UP THE TESTER ................................... 3
1.1.5 SELECTION OF THE DISPLAY LANGUAGE............. 3
1.1.6 SETTING THE SERIAL PORTS.................................. 5
2. CONNECTION OF THE ART® TO THE CONTROL UNITS .............................................................. 7
2.1 CONNECTING TO THE LIFT & ENGINE CONTROL UNITS ............................................................... 7
3. INTRODUCTION TO THE ELECTRONIC SYSTEM OF THE TRACTOR ............................................................ 9
3.1 ENGINE CONTROL UNIT ................................................... 9
3.1.1 ELECTRONIC ENGINE CONTROL SYSTEM............. 9
3.1.2 ELECTRONIC PRE-HEATING CONTROL SYSTEM 10
3.1.3 HML UNIT ELECTRONIC CONTROL SYSTEM....... 10
3.2 ELECTRONIC LIFT CONTROL UNIT ................................ 11
4. COMMISSIONING THE TRACTOR ................................ 13
4.1 INTRODUCTION ............................................................... 13
4.2 RENEWAL OF ENGINE CONTROL UNIT ......................... 13
4.2.1 SETTING TYPE OF ENGINE INSTALLED.............................................................. 13
4.2.2 CALIBRATING THE HAND THROTTLE ................... 15
4.2.3 CALIBRATING THE ACCELERATOR PEDAL ..................................................................... 18
4.2.4 CONFIGURE FOR HML........................................... 20
4.2.5 CONFIGURING THE TYPE OF PRE-HEATING......................................................... 21
4.2.6 CONFIGURING THE WHEELS
PARAMETER ........................................................... 23
4.2.7 CALIBRATING IDLING SPEED................................ 25
4.2.8 CANCELLING ALARMS........................................... 27
4.3 RENEWAL OF LIFT CONTROL UNIT ............................... 28
4.3.1 MAXIMUM HEIGHT CALIBRATION LIFT.......................................................................... 28
5. ALARMS .......................................................................... 31
5.1 ENGINE CONTROL UNIT ALARMS ................................. 31
5.1.1 LIST OF ALARMS DISPLAYED ON THE INSTRUMENT
PANEL (MEM WARNING LIGHT)............................. 31
5.1.2 LIST OF ALARMS DISPLAYED ON THE INSTRUMENT PANEL (PRE-HEATING INDICATOR LIGHT) ........... 31
5.1.3 LIST OF ALARMS DISPLAYED ON THE ART ......... 32
5.2 LIFT CONTROL UNIT ALARMS ........................................ 65
5.2.1 LIST OF ALARMS BY FLASH SEQUENCE ON LIFT CONTROL BUTTON................................................ 65
5.2.2 LIST OF ALARMS DISPLAYED ON THE ART ......... 66
6. ENGINE CONTROL UNIT TEST METER ........................ 77
PRESENTATION SCREEN ......................................................77
MAIN MENU ............................................................................77
1. ENGINE ...............................................................................79
1.1 CONFIGURATION .................................................... 79
1.2 CALIBRATION............................................................. 83
1.3 MONITOR.................................................................... 84
2. HML menu. ........................................................................85
2.1 CONFIGURATION....................................................... 85
2.2 TESTS ......................................................................... 86
2.3 MONITOR.................................................................... 87
3. PRE-HEATING .....................................................................88
3.1 CONFIGURATION....................................................... 88
3.2 TESTS ......................................................................... 89
3.3 MONITOR.................................................................... 90
4. ALARMS ..............................................................................91
4.1 INITIALIZATION........................................................... 91
4.2 ALARM LOG................................................................ 92
5. WHEEL CALIBRATION (water-cooled engines) ..................92
5. BELTS (air-cooled engines) .................................................93
5.1 CONFIGURATION....................................................... 93
5.2 TESTS ......................................................................... 94
5.3 MONITOR.................................................................... 94
6. WHEELS (water-cooled engines) ........................................95
6.1 WHEELS:..................................................................... 95
6. WHEELS (air-cooled engines) .............................................96
6.1 MONITOR.................................................................... 96
7. PTO (version with auto PTO) ...............................................97
7.1 CALIBRATION............................................................. 97
7.2 TESTS ......................................................................... 98
7.3 MONITOR.................................................................... 98
8. ENGINE LIST .......................................................................99
7. LIFT CONTROL UNIT TEST METER ............................ 101
PRESENTATION SCREEN ....................................................101
INITIALIZATION .....................................................................101
MAIN MENU ..........................................................................102
1. CALIBRATIONS .................................................................102
1.1 MAXIMUM HEIGHT................................................ 103
1.2 UP SPEED................................................................. 103
2. MONITOR MENU ...............................................................104
2.1 LIFT ........................................................................... 104
2.2 DRAFT....................................................................... 105
2.3 POSITION.................................................................. 106
3. TESTS ................................................................................106
3.1 SENSORS ................................................................. 107
3.2 VOLTAGES................................................................ 107
3.3 INPUTS...................................................................... 108
4. ALARMS ............................................................................109

SECTION 30:
FRONT HOODS ............................................. 1
Removal...................................................................... 1
Refitting ...................................................................... 2
WHEELS......................................................... 3
FRONT WHEELS.............................................................3
Removal...................................................................... 3
Refitting ...................................................................... 3
REAR WHEELS...............................................................4
Removal...................................................................... 4
Refitting ...................................................................... 4
SAFETY ROLL BAR....................................... 5
Removal...................................................................... 5
Refitting ...................................................................... 5
FUEL TANK.................................................... 6
MAIN TANK.....................................................................6
Removal...................................................................... 6
Refitting ...................................................................... 8
SUPPLEMENTARY TANK..............................................9
Draining ...................................................................... 9
Removal.................................................................... 10
Refitting .................................................................... 11
RADIATOR................................................... 12
Removal.................................................................... 12
Refitting .................................................................... 13
FRONT SUPPORT....................................... 14
Removal.................................................................... 14
Refitting .................................................................... 16
FRONT AXLE (4WD version) ...................... 17
Removal.................................................................... 17
Refitting .................................................................... 19
STEERING CYLINDER .................................................20
Removal.................................................................... 20
Refitting .................................................................... 22
STUB AXLE HOUSING & AXLE SHAFT .................23
Removal.................................................................... 23
Refitting .................................................................... 27
Adjusting the bearings preload ................................ 28
EPICYCLIC REDUCTION UNIT....................................31
Removal.................................................................... 31
Refitting .................................................................... 32
Disassembly ............................................................. 33
Assembly .................................................................. 36
PINION-DIFFERENTIAL ASSEMBLY ..........................37
Removal.................................................................... 37
Refitting .................................................................... 37
DIFFERENTIAL LOCK..................................................38
Removal.................................................................... 38
Refitting .................................................................... 40
Adjustment ............................................................... 41
BEVEL GEAR PAIR.......................................................44
Disassembly ............................................................. 44
Adjustment of the pinion position & bearing preloading................................................................. 48
Adjustment of the differential bearings preload ....... 53
Adjustment of the pinion & crown wheel .............. 57
Completion of assembly........................................... 57
DIFFERENTIAL .............................................................59
Disassembly ............................................................. 59
Assembly .................................................................. 60
PLATFORM ..................................................61
Removal.................................................................... 61
Refitting .................................................................... 68
CAB...............................................................69
Removal.................................................................... 69
Refitting .................................................................... 78
FRONT AXLE DRIVE SHAFT.......................79
Removal.................................................................... 79
Refitting .................................................................... 79
ENGINE.........................................................80
Preparation before separating the engine from
the transmission ....................................................... 80
Preparation for removal ............................................ 80
Separation or removal .............................................. 81
Refitting .................................................................... 84
CLUTCH ASSEMBLY...................................85
CLUTCH........................................................................85
Removal & renewal of the clutch plate ................. 85
Checking clutch plate wear ...................................... 85
Refitting the clutch plate........................................... 85
CLUTCH RELEASE BEARING .....................................86
Renewal .................................................................... 86
STARTER MOTOR.......................................87
Removal.................................................................... 87
Refitting .................................................................... 89
HML UNIT .................................................... 90
COMPLETE ASSEMBLY.............................................. 90
Removal ....................................................................90
Refitting .....................................................................93
Checking the reduction unit end float .......................95
CLUTCH UNITS............................................................ 96
Disassembly ..............................................................96
Assembly.................................................................103
PLANET CARRIER ASSEMBLY ................................ 109
Disassembly ............................................................109
Assembly.................................................................110
GEARBOX & SHUTTLE ASSEMBLY... 113
COMPLETE ASSEMBLY............................................ 113
Removal ..................................................................113
Refitting ...................................................................118
Separating from the transmission ...........................119
Reassembly.............................................................123
Disassembly ............................................................124
Assembly.................................................................124
SHUTTLE - UNDERDRIVE SHAFT............................ 125
Disassembly ............................................................125
Assembly.................................................................128
PRIMARY SHAFT....................................................... 130
Disassembly ............................................................130
Assembly.................................................................131
SECONDARY SHAFT................................................. 132
Disassembly ............................................................132
Assembly.................................................................140
GEAR SELECTOR ROD............................................. 146
Disassembly ............................................................146
Assembly.................................................................146
SHUTTLE & UNDERDRIVE SELECTOR ROD..... 147
Disassembly ............................................................147
Assembly.................................................................147
FOUR-WHEEL DRIVE ENGAGEMENT CONTROL... 148
Removal ..................................................................148
Refitting ...................................................................148
Disassembly ............................................................149
Assembly.................................................................150
HYDRAULIC PUMPS ................................ 151
PUMP FOR STEERING CIRCUIT & SOLENOID VALVES................................................... 151
Removal ..................................................................151
Refitting ...................................................................152
PUMP FOR HYDRAULIC LIFT & AUXILIARY SERVICES................................................................... 153
Removal ..................................................................153
Refitting ...................................................................154
HYDRAULIC TRAILER BRAKING VALVE................. 155
Removal ..................................................................155
Refitting ...................................................................156
HYDRAULIC LIFT
(VERSION WITH MECHANICAL
GOVERNOR) ..............................................157
COMPLETE ASSEMBLY ........................................... 157
Removal ................................................................. 157
Refitting .................................................................. 160
Disassembly ........................................................... 161
Assembly................................................................ 167
BUSHES ..................................................................... 168
Renewal.................................................................. 168
HYDRAULIC LIFT CONTROL VALVE ....................... 169
Removal ................................................................. 169
Refitting .................................................................. 170
Disassembly ........................................................... 171
Assembly................................................................ 174
LIFT CYLINDER ......................................................... 176
Disassembly ........................................................... 176
Assembly................................................................ 177
MECHANICAL DRAFT SENSOR............................... 179
Removal ................................................................. 179
Refitting .................................................................. 179
Disassembly ........................................................... 180
Assembly................................................................ 181
LIFT CONTROL LEVERS........................................... 183
Adjustments ........................................................... 183
REMOTE CONTROL VALVE......................186
Removal ................................................................. 186
Refitting .................................................................. 188
REAR AXLE................................................189
RIGHT & LEFT AXLES.......................................... 189
Preparation for removal of the right axle................ 189
Preparation for removal of the left axle .................. 191
Removal of the complete rear axle......................... 192
Refitting .................................................................. 193
Disassembly (wide version) .................................... 194
Assembly................................................................ 197
Disassembly (narrow version)................................. 199
Assembly................................................................ 202
PLANET CARRIER ASSEMBLY................................ 204
Disassembly ........................................................... 204
Assembly................................................................ 204
BRAKES .....................................................205
REAR AXLE BRAKES ................................................ 205
Renewal of brake discs .......................................... 205
BRAKING PISTON ..................................................... 206
Disassembly ........................................................... 206
Assembly................................................................ 206
FRONT AXLE BRAKES.............................................. 208
Removal discs ........................................................ 208
Refitting .................................................................. 209
Piston disassembly ................................................ 210
Piston assembly ..................................................... 210 PARKING BRAKE .......................................................211
Removal of the friction shoes................................. 211
Refitting the friction shoes...................................... 213
Disassembly ........................................................... 215
Assembly ................................................................ 215
BRAKE CYLINDERS...................................................216
Removal.................................................................. 216
Refitting .................................................................. 217
SERVICE VALVES ASSEMBLY................. 218
Removal.................................................................. 218
Refitting .................................................................. 221
Disassembly ........................................................... 222
Assembly ................................................................ 224
3-POINT LINKAGE .................................... 225
Removal.................................................................. 225
Refitting .................................................................. 227
TOWING HITCH......................................... 228
Removal.................................................................. 228
Refitting .................................................................. 228
REAR PTO ................................................. 229
PTO INPUT SHAFT.....................................................229
Removal.................................................................. 229
Refitting .................................................................. 230
PTO CLUTCH..............................................................231
Removal.................................................................. 231
Refitting .................................................................. 232
Disassembly ........................................................... 233
Assembly ................................................................ 237
PTO OUTPUT SHAFT (2-SPEED + GROUNDSPEED VERSION)....................... 238
Disassembly ........................................................... 238
Assembly ................................................................ 242
GROUNDSPEED PTO DRIVE SHAFT........................243
Disassembly ........................................................... 243
Assembly ................................................................ 244
RANGE GEARBOX & REAR DIFFERENTIAL ASSEMBLY......................245
COMPLETE ASSEMBLY............................................245
Disassembly ........................................................... 245
Assembly ................................................................ 245
PUMP DRIVE PTO......................................................246
Disassembly ........................................................... 246
Assembly ................................................................ 248
DIFFERENTIAL UNIT..................................................249
Removal.................................................................. 249
Refitting .................................................................. 251
Disassembly ........................................................... 252
Assembly ................................................................ 254
PINION ........................................................................255
Disassembly ........................................................... 255
Assembly ................................................................ 258
RANGE SELECTOR ROD...........................................259
Disassembly ........................................................... 259
Assembly ................................................................ 260
4WD & GROUND SPEED PTO OUTPUT SHAFT.261
Disassembly ........................................................... 261
Assembly ................................................................ 265
BEVEL GEAR PAIR.....................................................266
Preparation of adjustments .................................... 266
Adjustment of the differential bearings preload ..... 268
Adjustment of the pinion position........................... 270
Adjustment of the pinion & crown wheel ............ 272
INSTRUMENT PANEL ...............................273
Removal.................................................................. 273
Refitting .................................................................. 275
POWER STEERING....................................276
Removal.................................................................. 276
Refitting .................................................................. 277
CLUTCH MASTER CYLINDER..................278
Removal.................................................................. 278
Refitting .................................................................. 279

SECTION 40:
THE STRUCTURE OF THE UNIT ...................................1
HOW TO CONSULT THE UNIT ......................................2
1. INTRODUCTION .........................................................3
1.1 LIST OF WIRING HARNESSES ...............................................3
1.2 DEFINITION OF COMPONENTS & SYMBOLS ..................4
1.3 GENERAL RULES....................................................................5
1.3.1 MODIFICATION OF THE TRACTOR'S ELECTRICAL / ELECTRONIC CIRCUITS ............................................5
1.3.2 MAIN WIRING FAULTS.............................................. 5
1.3.3 REMOVAL, REFITTING & DRYING OF
CONNECTORS & WIRINGI................................... 6
1.4 DIAGNOSTIC INSTRUMENTS.................................................7
1.5 WIRE COLOUR CODES...........................................................7
2. INDEX ..........................................................................8
2.1 INDEX BY PART DESCRIPTION..............................................8
2.2 COMPONENT CODE INDEX .................................................15
2.3 CONNECTOR INDEX.............................................................21
3. COMPONENTS .........................................................31
3.1 COMPONENT TECHNICAL DATA.........................................31
3.2 PINOUTS & DESCRIPTIONS OF ELECTRONIC CONTROL UNITS..................................................................40
3.2.1 ENGINE CONTROL UNIT ........................................40
3.2.2 HML CONTROL UNIT (FOR VERSIONS MECHANICAL GOVERNOR ONLY).................................................. 42
3.2.3 ELECTRONIC LIFT CONTROL UNIT ...................... 43
3.2.4 PRE-HEATING CONTROL UNIT (FOR VERSIONS WITH MECHANICAL GOVERNOR ONLY)...................................................44
4. SYSTEMS ..................................................................45
4.1 EARTHING POINTS...............................................................45
4.2 STARTING & PREHEATING (ELECTRONIC GOVERNOR CAB VERSION)......................48
4.3 STARTING & PREHEATING (MECHANICAL GOVERNOR CAB VERSION).....................49
4.4 ELECTRONIC ENGINE CONTROL (ELCTRONIC GOVERNOR CAB VERSION)........................50
4.5 LIGHTS - STEERING COLUMN SWITCH UNIT (ELECTRONIC GOVERNOR CAB VERSION)......................51
4.6 LIGHTS - STEERING COLUMN SWITCH UNIT (MECHANICAL GOVERNOR CAB VERSION).....................52
4.7 DIAGNOSTIC ACCESSORIES (ELECTRONIC GOVERNOR CAB VERSION)......................53
4.8 DIAGNOSTIC ACCESSORIES (ELECTRONIC GOVERNOR PLATFORM VERSION) ..........54
4.9 DIAGNOSTIC ACCESSORIES (MECHANICAL GOVERNOR CAB VERSION).....................55
4.10 DIAGNOSTIC ACCESSORIES (MECHANICAL GOVERNOR PLATFORM VERSION) .........56
4.11 INSTRUMENT PANEL (ELECTRONIC GOVERNOR CAB VERSION)......................57
4.12 INSTRUMENT PANEL (MECHANICAL GOVERNOR CAB VERSION).....................58
4.13 WORKLIGHT (VERSION WITH CAB ELECTRONIC GOVERNOR)............59
4.14 WORKLIGHT (VERSION WITH PLATFORM ELECTRONIC GOVERNOR) 60
4.15 WORKLIGHT (VERSION WITH CAB MECHANICAL GOVERNOR)...........61
4.16 WORKLIGHT (VERSION WITH PLATFORM MECHANICAL
GOVERNOR).......................................................................62
4.17 WINDSCREEN WIPERS (VERSION WITH CAB ELECTRONIC GOVERNOR)............63
4.18 WINDSCREEN WIPERS (VERSION WITH MECHANICAL GOVERNOR) ...................64
4.19 HEATING (VERSION WITH CAB ELECTRONIC GOVERNOR)............65
4.20 HEATING (VERSION WITH CAB MECHANICAL GOVERNOR)...........66
4.21 AIR CONDITIONING (VERSION WITH CAB ELECTRONIC GOVERNOR)............67
4.22 AIR CONDITIONING (VERSION WITH CAB MECHANICAL GOVERNOR)...........68
4.23 BRAKES (ELECTRONIC GOVERNOR CAB VERSION)......................69
4.24 BRAKES (MECHANICAL GOVERNOR CAB VERSION).....................70
4.25 HML TRANSMISSION (VERSION WITH CAB ELECTRONIC GOVERNOR)............71
4.26 HML TRANSMISSION (VERSION WITH CAB MECHANICAL GOVERNOR)...........72
4.27 ELECTRONIC LIFT CONTROL (ELECTRONIC GOVERNOR CAB VERSION)......................73
4.28 ELECTRONIC LIFT CONTROL (MECHANICAL GOVERNOR CAB VERSION).....................74
4.29 FRONT & REAR PTOS (ELECTRONIC GOVERNOR CAB VERSION)......................75
4.30 FRONT & REAR PTOS (MECHANICAL GOVERNOR CAB VERSION).....................76
4.31 FRONT CONTROL VALVE (VERSION WITH CAB ELECTRONIC GOVERNOR)............77
4.32 FRONT CONTROL VALVE (VERSION WITH CAB MECHANICAL GOVERNOR)...........78
4.33 3-POINT LINKAGE (VERSION WITH CAB ELECTRONIC GOVERNOR)............79
4.34 3-POINT LINKAGE (VERSION WITH CAB MECHANICAL GOVERNOR)...........80
5. WIRING .....................................................................81
BATTERY LEADS WIRING...........................................................81
CENTRAL WIRING (VERSION WITH MECHANICAL GOVERNOR) ...........................85
DIAGNOSTIC SOCKET WIRING..................................................87
REAR WIRING
(VERSION WITH MECHANICAL GOVERNOR) ...........................99
REAR WIRING ...........................................................................101
CENTRAL WIRING (VERSION WITH ELECTRONIC GOVERNOR) ..........................107
REAR WIRING (VERSION WITH ELECTRONIC GOVERNOR) ..........................121
ENGINE WIRING (3-CYLINDER VERSION) ..............................129
ENGINE WIRING (4-CYLINDER VERSION) ..............................131
ROTATING BEACON WIRING...................................................133
CAB LIGHTS WIRING................................................................134
FRONT PTO WIRING.................................................................135
WIRING FOR ROLL BAR LIGHTS .............................................136
PRE-HEATING & SUPPLY WIRING (3-CYLINDER VERSION WITH CAB) .........................................145
PRE-HEATING & SUPPLY WIRING (4-CYLINDER VERSION WITH CAB) ......................................... 146
PRE-HEATING & SUPPLY WIRING (3-CYLINDER VERSION WITH PLATFORM) ............................. 147
PRE-HEATING & SUPPLY WIRING (4-CYLINDER VERSION WITH PLATFORM) ............................. 148
ELECTRONIC LIFT WIRING ..................................................... 149
ROOF LINE WIRING ................................................................. 155
CAB POWER SUPPLY WIRING ................................................ 157
WINDSCREEN WIPER WIRING................................................. 158
HEATER WIRING....................................................................... 163
AIR CONDITIONING SYSTEM WIRING..................................... 167
AIR CONDITIONING FAN WIRING ........................................... 171
WIRING FOR WORKLIGHTS, REAR WINDOW WIPER & FLASHING LIGHT ............................................................ 175
EARTH WIRING......................................................................... 177
FRONT CONTROL VALVE WIRING .......................................... 183
FRONT CONTROL VALVE SOLENOID VALVE WIRING............ 185
3-POINT LINKAGE WIRING....................................................... 187
______________________________________



There are lots of pictures, diagrams, illustrations and charts.

Mechanical details and step-by-step instructions you will need are included.


**************************************************************************
TO GET THIS MANUAL IMMEDIATELY -
CLICK THE GREEN & WHITE DOWNLOAD BUTTON
- at the Top Right-Hand Side of this Page ->
**************************************************************************


I have Thousands of Manuals - email me about any you might need.


Tags: Deutz Fahr Same Dorado S V 70 75 90 100 S70 S75 S90 S100 V70 V75 V90 V100 Tractor Tractors Repair Shop Workshop Technical Service Maintenance Troubleshoot Trouble shoot fix DIY overhaul Original Equipment Manufacturer OEM wsm fsm Manual Manuals Instant Download Immediate downloads pdf free book ebook ebooks
File Data

This file is sold by manualsmanualsmanuals, an independent seller on Tradebit.

File Size 17 megabytes
File Type PDF
Our Reviews
© Tradebit 2004-2020
All files are property of their respective owners
Questions about this file? Contact manualsmanualsmanuals
DMCA/Copyright or marketplace issues? Contact Tradebit