Download Now
Sold by onedollar on Tradebit
The world's largest download marketplace
2,983,254 satisfied buyers
Shopper Award

Toshiba e-STUDIO 2500c, e-STUDIO 3500c, e-STUDIO 3510c, HandBook Manual

HandBook Manual Toshiba e-STUDIO 2500c, e-STUDIO 3500c, e-STUDIO 3510c;
This manual, Toshiba e-STUDIO 2500c, e-STUDIO 3500c, e-STUDIO 3510c, is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your copier.
You can print, zoom or read any diagram, picture or page from this HandBook Manual. Every chapter on this manual is fully detailed and contain all the simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Toshiba e-STUDIO 2500c, e-STUDIO 3500c, e-STUDIO 3510c photocopier. You can find easily everything what do you need.
To see what contain, please read table of contents:

1.1 Specifications
1.2 Accessories
1.3 Options
1.4 Supplies
1.5 System List

2.1 Error Code List
2.1.1 Jam
2.1.2 Service call
2.1.3 Error in Internet FAX / Scanning Function
2.1.4 Printer function error
2.2 Self-diagnosis Modes
2.2.1 Input check (Test mode 03)
2.2.2 Output check (test mode 03)
2.2.3 Test print mode (test mode 04)
2.2.4 Adjustment mode (05)
2.2.5 Setting mode (08)
2.2.6 Pixel counter

3.1 Adjustment Order (Image Related Adjustment)
3.2 Adjustment of the Auto-Toner Sensor
3.3 Performing Image Quality Control
3.4 Adjustment of Color Registration Control
3.5 Adjustment of the transfer belt due to environmental factors
3.6 Image Dimensional Adjustment
3.6.1 General description
3.6.2 Paper alignment at the registration roller
3.6.3 Printer related adjustment
3.6.4 Scanner related adjustment
3.7 Image Quality Adjustment (Copying Function)
3.7.1 Automatic gamma adjustment
3.7.2 Density adjustment
3.7.3 Color balance adjustment
3.7.4 Gamma balance adjustment
3.7.5 Offsetting adjustment for background / high density area processing
3.7.6 Judgment threshold for ACS
3.7.7 Sharpness adjustment
3.7.8 Setting range correction
3.7.9 Setting range correction (Adjustment of background peak)
3.7.10 Adjustment of smudged/faint text
3.7.11 Color Adjustment of Marker
3.7.12 Beam level conversion setting
3.7.13 Maximum toner density adjustment to paper type
3.7.14 Maximum text density adjustment
3.7.15 Text/Photo reproduction level adjustment
3.7.16 Black reproduction switching at the Twin color copy mode
3.7.17 Background adjustment (Black Mode)
3.7.18 Black header density level adjustment
3.7.19 Black area adjustment in twin color copy mode
3.8 Image Quality Adjustment (Printing Function)
3.8.1 Automatic gamma adjustment
3.8.2 Gamma balance adjustment (Black Mode)
3.8.3 Color balance adjustment (Color Mode)
3.8.4 Adjustment of smudged/faint text
3.8.5 Upper limit value at Toner Saving Mode
3.8.6 Maximum toner density adjustment to paper type
3.8.7 Image processing: Gamma correction table all clearing
3.8.8 Fine line enhancement switchover
3.8.9 Filter switchover
3.8.10 "PureBlack" threshold adjustment (PCL)
3.8.11 "PureGray" threshold adjustment (PCL)
3.8.12 "PureBlack/Gray" threshold adjustment (PS-Device color)
3.8.13 "PureBlack/Gray" threshold adjustment (PS-CIE Based color)
3.8.14 Toner limit threshold adjustment
3.8.15 Screen switchover
3.8.16 Sharpness adjustment
3.8.17 Quantization parameter for intermediate file creation
3.9 Image Quality Adjustment (Scanning Function)
3.9.1 Gamma balance adjustment
3.9.2 Density adjustment
3.9.3 Background adjustment (Color Mode)
3.9.4 Judgment threshold for ACS
3.9.5 Sharpness adjustment
3.9.6 Setting range correction
3.9.7 Setting range correction (Adjustment of background peak)
3.9.8 Fine adjustment of black density
3.9.9 RGB conversion method selection
3.9.10 Adjustment of brightness
3.9.11 Reproduction ratio of primary scanning direction (black)
3.9.12 Reproduction ratio of primary scanning direction (color)
3.10 Image Quality Adjustment (FAX Function)
3.10.1 Density adjustment
3.11 High-Voltage Transformer Setting
3.11.1 General description
3.12 Adjustment of the Scanner Section
3.12.1 Carriages
3.12.2 Lens unit
3.12.3 Belt tension adjustment for the scan motor
3.13 Adjustment of the Paper Feeding System
3.13.1 Sheet sideways deviation caused by paper feeding
3.14 Adjustment of the doctor-to-sleeve gap
3.15 Adjustment of Gap between Transfer Belt Unit (TBU) Drive Gears
3.16 Adjustment of the Separation Plate Gap (Fuser unit)
3.17 Adjustment of the RADF (MR-3018)
3.17.1 Adjustment of RADF Position
3.17.2 Adjustment of RADF Height
3.17.3 Adjustment of Skew
3.17.4 Adjustment of the Leading Edge Position
3.17.5 Adjustment of Horizontal Position
3.17.6 Adjustment of Copy Ratio
3.17.7 Adjustment of RADF Opening/Closing Sensor
3.18 Adjustment of the Finisher (MJ-1101)
3.18.1 Adjusting the Alignment Position
3.18.2 Adjusting the Stapling Position
3.18.3 B4-size recycled paper mode settings
3.19 Adjustment of the Finisher (MJ-1030)
3.19.1 Adjusting the alignment position (Finisher unit)
3.19.2 Adjusting the staple position (Finisher unit)
3.19.3 Adjusting the folding position (Saddle stitcher unit)
3.19.4 Fine adjustment of binding/folding position (Saddle stitcher unit)
3.19.5 Sensor output adjustment (Puncher unit)
3.19.6 Registering the number of punch holes (Puncher unit)

4.1 PM Support Mode
4.1.1 General description
4.1.2 Operational flow and operational screen
4.1.3 Work flow of parts replacement
4.2 General Descriptions for PM Procedure
4.3 Operational Items in Overhauling
4.4 Preventive Maintenance Checklist
4.5 PM KIT
4.6 Maintenance Part List
4.7 Grease List
4.8 Precautions for Storing and Handling Supplies
4.8.1 Precautions for storing TOSHIBA supplies
4.8.2 Checking and cleaning of photoconductive drum
4.8.3 Checking and cleaning of drum cleaning blade and transfer belt cleaning blade
4.8.4 Handling of transfer belt
4.8.5 Checking and cleaning of fuser belt and pressure roller

5.1 Diagnosis and Prescription for Each Error Code
5.1.1 Paper transport jam (paper exit section)
5.1.2 Paper misfeeding
5.1.3 Paper transport jam
5.1.4 Other paper jam
5.1.5 Cover open jam
5.1.6 RADF jam
5.1.7 Finisher jam
5.1.8 Paper feeding system related service call
5.1.9 Scanning system related service call
5.1.10 Fuser unit related service call
5.1.11 Communication related service call
5.1.12 RADF related service call
5.1.13 Circuit related service call
5.1.14 Laser optical unit related service call
5.1.15 Finisher related service call
5.1.16 Image control related service call
5.1.17 Copy process related service call
5.1.18 Other service call
5.1.19 Error in Internet FAX / Scanning Function
5.1.20 Printer function error
5.2 Troubleshooting for the Image
5.3 Replacement of PC Boards and HDD
5.3.1 Replacing HDD
5.3.2 Replacing SYS board
5.3.3 Replacing SLG board
5.3.4 Replacing NVRAM (SYS board)
5.3.5 Replacing NVRAM (LGC board)
5.3.6 Cautions when Data overwrite kit (GP-1060) is installed
5.3.7 HDD information display
5.4 Other errors
5.4.1 Operation cannot be performed (operation from the control panel is
not successful) after installing the option(s) such as Wireless LAN module
and/or Parallel board
5.4.2 The connection to the Wireless LAN cannot be made even though
it is set to "Enabled"
5.4.3 "Start page" cannot be printed when the firmware of the equipment or
the system software of the EFI controller (GA-1210) is updated
after the EFI controller (GA-1210) is installed in the equipment
5.5 AES data Encryption Function Setting (Except for CND)
5.5.1 Procedure for enabling data encryption function
5.5.2 Procedure for disabling data encryption function
5.5.3 Procedure for discarding HDD when data encryption function is enabled

6.1 Firmware Updating with Download Jig
6.1.1 PWA-DWNLD-350-JIG2 (48 MB)
6.1.2 Writing the data to the download jig (PWA-DWNLD-350-JIG)
6.1.3 K-PWA-DLS-320
6.1.4 K-PWA-DLM-320
6.2 Firmware Updating with USB Storage Device
6.3 When Firmware Updating Fails
6.4 Appendix

7.1 Output Channel
7.2 Fuse
7.3 Configuration of Power Supply Unit

8.1 Auto Supply Order
8.1.1 Outline
8.1.2 Setting Item
8.1.3 Setting procedure
8.1.4 Order Sheet Format
8.2 Service Notification
8.2.1 Outline
8.2.2 Setting
8.2.3 Items to be notified


10.1 AC Wire Harness
10.2 DC Wire Harness
10.3 Electric Parts Layout

Numbers of pages: 774.
File Data

This file is sold by onedollar, an independent seller on Tradebit.

File Size 33 megabytes
File Type PDF
Our Reviews
© Tradebit 2004-2020
All files are property of their respective owners
Questions about this file? Contact onedollar
DMCA/Copyright or marketplace issues? Contact Tradebit