$14.95

Download Now
Sold by onedollar on Tradebit
The world's largest download marketplace
2,919,007 satisfied buyers
Shopper Award

Toshiba e-STUDIO 3511, e-STUDIO 4511, Handbook Manual

HandBook Manual Toshiba e-STUDIO 3511, e-STUDIO 4511;
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Toshiba e-STUDIO 3511, e-STUDIO 4511 copier.
You can print, zoom or read any diagram, picture or page from this HandBook Manual. Every chapter on this manual is fully detailed and contain all the simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Toshiba e-STUDIO 3511, e-STUDIO 4511 photocopier. You can find easily everything what do you need.
To see what contain, please read table of contents:

1 SPECIFICATIONS/ACCESSORIES/OPTIONS/SUPPLIES
1.1 Specifications
1.2 Accessories
1.3 Options
1.4 Supplies
1.5 System List

2 ERROR CODE AND SELF-DIAGNOSTIC MODE
2.1 Error Code List
2.1.1 Jam
2.1.2 Service call
2.1.3 Error in Internet FAX / Scanning Function
2.1.4 Printer function error
2.2 Self-diagnosis Modes
2.2.1 Input check (Test mode 03)
2.2.2 Output check (test mode 03)
2.2.3 Test print mode (test mode 04)
2.2.4 Adjustment mode (05)
2.2.5 Setting mode (08)
2.2.6 Pixel counter
2.2.7 Classification List of Adjustment Mode (05) / Setting Mode (08)

3 ADJUSTMENT
3.1 Adjustment Order (Image Related Adjustment)
3.2 Adjustment of the Auto-Toner Sensor
3.3 Performing Image Quality Control
3.4 Image Dimensional Adjustment
3.4.1 General description
3.4.2 Paper alignment at the registration roller
3.4.3 Printer related adjustment
3.4.4 Scanner related adjustment
3.5 Image Quality Adjustment (Copying Function)
3.5.1 Automatic gamma adjustment
3.5.2 Density adjustment
3.5.3 Color balance adjustment
3.5.4 Gamma balance adjustment
3.5.5 Offsetting adjustment for background processing
3.5.6 Judgment threshold for ACS
3.5.7 Sharpness adjustment
3.5.8 Setting range correction
3.5.9 Setting range correction (Adjustment of background peak)
3.5.10 Adjustment of smudged/faint text
3.5.11 Adaptation to highlighter
3.5.12 Beam level conversion setting
3.5.13 Maximum toner density adjustment to paper type
3.5.14 Maximum text density adjustment
3.5.15 Text/Photo reproduction level adjustment
3.5.16 Black reproduction switching at the Twin color copy mode
3.6 Image Quality Adjustment (Printing Function)
3.6.1 Automatic gamma adjustment
3.6.2 Gamma balance adjustment (Black Mode)
3.6.3 Color balance adjustment (Color Mode)
3.6.4 Adjustment of smudged/faint text
3.6.5 Upper limit value at Toner Saving Mode
3.6.6 Dot size adjustment in black printing
3.6.7 Maximum toner density adjustment to paper type
3.6.8 Image processing: Gamma correction table all clearing
3.7 Image Quality Adjustment (Scanning Function)
3.7.1 Gamma balance adjustment
3.7.2 Density adjustment (Black Mode)
3.7.3 Background adjustment (Gray Scale Mode)
3.7.4 Background adjustment (Color Mode)
3.7.5 Judgment threshold for ACS
3.7.6 Sharpness adjustment
3.7.7 Setting range correction
3.7.8 Setting range correction (Adjustment of background peak)
3.7.9 Fine adjustment of black density
3.7.10 RGB conversion method selection
3.7.11 Reproduction ratio of primary scanning direction (black)
3.7.12 Reproduction ratio of primary scanning direction (color)
3.8 High-Voltage Transformer Setting
3.8.1 General description
3.8.2 Setting at the replacement of high-voltage transformer
3.9 Adjustment of the Scanner Section
3.9.1 Carriages
3.9.2 Lens unit
3.10 Adjustment of the Paper Feeding System
3.10.1 Sheet sideways deviation caused by paper feeding
3.11 Adjustment of the Developer Unit
3.11.1 Doctor-to-sleeve gap (black developer unit)
3.11.2 Doctor-to-sleeve gap (color developer unit)
3.12 Adjustment of the RADF (MR-3015)
3.12.1 Adjustment of RADF position
3.12.2 Adjustment of RADF height
3.12.3 Adjustment of skew
3.12.4 Automatic adjustment of sensors and initialization of EEPROM
3.12.5 Adjustment of aligning
3.12.6 Adjustment of aligning at reversing
3.12.7 Adjustment of reverse solenoid
3.12.8 Adjustment of RADF opening/closing switch
3.12.9 Adjustment of RADF opening/closing sensor
3.12.10 Adjustment of tray volume
3.13 Adjustment of the Finisher (MJ-1022)
3.13.1 Adjusting the jogging plate width
3.13.2 Adjusting the angle of the jogging plate
3.13.3 Adjusting the overlap of the sensor flag
3.13.4 Adjusting the tension of the stack processing motor belt
3.13.5 Releasing the stack tray guide lever fixing plate
3.13.6 Adjustment of the upper tray angle
3.13.7 DIP switch functions
3.14 Adjustment of the Finisher (MJ-1023/1024)
3.14.1 Adjusting the alignment position (Finisher unit)
3.14.2 Adjusting the staple position (Finisher unit)
3.14.3 Adjusting the folding position (Saddle stitcher unit)
3.14.4 Fine adjustment of binding/folding position (Saddle stitcher unit)
3.14.5 Sensor output adjustment (Puncher unit)
3.14.6 Registering the number of punch holes (Puncher unit)
3.15 Key Copy Counter (MU-8, MU-10)
3.16 Adjustment of Transfer Belt Deviation
3.16.1 Outline
3.16.2 Transfer belt deviation
3.16.3 Adjustment procedure

4 PREVENTIVE MAINTENANCE (PM)
4.1 PM Support Mode
4.1.1 General description
4.1.2 Operational flow and operational screen
4.1.3 Work flow of parts replacement
4.2 General Descriptions for PM Procedure
4.3 Operational Items in Overhauling
4.4 Preventive Maintenance Checklist
4.5 PM KIT
4.6 Jig List
4.7 Grease List
4.8 Precautions for Storing and Handling Supplies
4.8.1 Precautions for storing TOSHIBA supplies
4.8.2 Checking and cleaning of photoconductive drum
4.8.3 Checking and cleaning of drum cleaning blade and
transfer belt cleaning blade
4.8.4 Handling of drum cleaner brush
4.8.5 Handling of transfer belt
4.8.6 Checking and cleaning of fuser belt and pressure roller
4.8.7 Checking and replacing the oil roller and cleaning roller

5 TROUBLESHOOTING
5 Diagnosis and Prescription for Each Error Code
5.1.1 Paper transport jam (paper exit section)
5.1.2 Paper misfeeding
5.1.3 Paper transport jam
5.1.4 Other paper jam
5.1.5 Cover open jam
5.1.6 RADF jam
5.1.7 Finisher jam
5.1.8 Drive system related service call
5.1.9 Paper feeding system related service call
5.1.10 Scanning system related service call
5.1.11 Fuser unit related service call
5.1.12 Communication related service call
5.1.13 RADF related service call
5.1.14 Circuit related service call
5.1.15 Laser optical unit related service call
5.1.16 Finisher related service call
5.1.17 Image control related service call
5.1.18 Copy process related service call
5.1.19 Toner density control related service call
5.1.20 Other service call
5.1.21 Error in Internet FAX / Scanning Function
5.2 Troubleshooting of Image
5.3 Replacement of PC Boards and HDD
5.3.1 Replacing HDD
5.3.2 Replacing SYS board
5.3.3 Replacing SLG board
5.3.4 NVRAM replacing and clearing

6 FIRMWARE UPDATING
6.1 Firmware Updating with Download Jig
6.1.1 PWA-DWNLD-350-JIG2 (48 MB)
6.1.2 PWA-DWNLD-350-JIG1 (16 MB)
6.1.3 Writing the data to the download jig (PWA-DWNLD-350-JIG)
6.1.4 K-PWA-DLM-320
6.2 Firmware Updating with FSMS (Field Service Manager)
6.3 Firmware Updating with USB Storage Device
Assist Mode

7 POWER SUPPLY UNIT
7.1 Output Channel
7.2 Fuse
7.3 Configuration of Power Supply Unit

8 REMOTE SERVICE
8.1 Auto Supply Order
8.1.1 Outline
8.1.2 Setting Item
8.1.3 Setting procedure
8.1.4 Order Sheet Format
8.2 Service Notification
8.2.1 Outline
8.2.2 Setting
8.2.2.1 Preparation
8.2.2.2 Setting procedure
8.2.3 Items to be notified

9 WIRE HARNESS CONNECTION DIAGRAMS
9.1 AC Wire Harness
9.2 DC Wire Harness
9.3 Connector Table

Numbers of pages: 552.
File Data

This file is sold by onedollar, an independent seller on Tradebit.

File Size 17 megabytes
File Type PDF
Our Reviews
© Tradebit 2004-2020
All files are property of their respective owners
Questions about this file? Contact onedollar
DMCA/Copyright or marketplace issues? Contact Tradebit