Service Manual & Parts List Ricoh Aficio MP201SPF, MP201F;
This service manual, is the full Ricoh Aficio MP201SPF, MP201F Service Repair Manual.
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Ricoh Aficio MP201SPF, MP201F copier.
You can print, zoom or read any diagram, picture or page from this Service Manual & Parts List. Every chapter on this manual is fully detailed and contain all the simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Ricoh Aficio MP201SPF, MP201F photocopier. You can find easily everything what do you need.
To see what contain, please read table of contents:

Content for SERVICE MANUAL:
PRODUCT INFORMATION
1. PRODUCT INFORMATION
1.1 SPECIFICATIONS
1.2 MACHINE CONFIGURATION
1.2.1 MAINFRAME
1.2.2 SYSTEM COMPONENTS
1.3 OVERVIEW
1.3.1 COMPONENT LAYOUT
Mainframe
ARDF
1.3.2 ELECTRICAL COMPONENTS
Electrical Components 1
Electrical Components 2
ARDF
1.3.3 PAPER PATH
1.3.4 DRIVE LAYOUT
Mainframe
ARDF
1.4 GUIDANCE FOR THOSE WHO ARE FAMILIAR WITH PREDECESSOR
PRODUCTS

INSTALLATION
2. INSTALLATION
2.1 INSTALLATION CAUTIONS
2.2 INSTALLATION REQUIREMENTS
2.2.1 ENVIRONMENT
2.2.2 MACHINE LEVEL
2.2.3 MINIMUM OPERATIONAL SPACE REQUIREMENTS
2.2.4 POWER REQUIREMENTS
2.3 COPIER
2.3.1 ACCESSORY CHECK
Printer/Scanner and Fax Model (D115)/ Fax Model (D116)
Installation Procedure
Interface settings
Copier settings
Fax Settings
2.3.2 OPTIONAL HANDSET
Accessory Check
Installation Procedure
2.4 PAPER TRAY UNIT (D567)
2.4.1 ACCESSORY CHECK
2.4.2 INSTALLATION PROCEDURE
2.5 PAPER TRAY UNIT HEATER
2.5.1 ACCESSORY CHECK
2.5.2 INSTALLATION PROCEDURE
2.6 USB 2.0/SD SLOT TYPE B
2.6.1 ACCESSORY CHECK
2.6.2 INSTALLATION PROCEDURE
When Installing the Handset
2.6.3 TESTING THE SD CARD/USB SLOT
2.7 OPTIONAL PAPER TRAY GRIP HANDLE
2.7.1 ACCESSORIES
Installation Procedure
2.8 CONTROLLER OPTIONS
2.8.1 OVERVIEW
2.8.2 WIRELESS LAN (IEEE 802.11A/G) INSTALLATION
Accessories
Installation Procedure
SP Mode Settings for IEEE 802.11a/g Wireless LAN
2.8.3 IEEE 1284 INSTALLATION
Accessories
Installation Procedure
2.8.4 VM CARD TYPE L (D467)
Accessories
Installation
2.8.5 GIGABIT ETHERNET
2.8.6 HDD OPTION (D577)
Component Check
Installation Procedure
After Installing the HDD
Installing the Security Card
Activating the Security Applications
HDD Encryption Recovery from a Device Problem
Restoring the Encryption key
Clearing the NVRAM

PREVENTIVE MAINTENANCE
3. PREVENTIVE MAINTENANCE
3.1 MAINTENANCE TABLES
3.2 HOW TO CLEAR THE PM COUNTER

REPLACEMENT AND ADJUSTMENT
4. REPLACEMENT AND ADJUSTMENT
4.1 PRECAUTIONS
4.1.1 GENERAL
4.1.2 LITHIUM BATTERIES
4.1.3 HALOGEN-FREE CABLE
4.1.4 STATIC ELECTRICITY
4.2 SPECIAL TOOLS AND LUBRICANTS
4.3 EXTERIOR COVERS AND OPERATION PANEL
4.3.1 REAR COVER
4.3.2 COPY TRAY
4.3.3 OPERATION PANEL AND UPPER COVERS
4.3.4 RIGHT DOOR
4.3.5 BYPASS TRAY
4.3.6 PLATEN COVER SENSOR
4.4 SCANNER UNIT
4.4.1 EXPOSURE GLASS
4.4.2 LENS BLOCK
4.4.3 EXPOSURE LAMP, LAMP STABILIZER BOARD
4.4.4 SCANNER MOTOR
4.4.5 SCANNER HP SENSOR
4.4.6 SCANNER ALIGNMENT ADJUSTMENT
4.5 FUSING
4.5.1 FUSING UNIT
4.5.2 EXIT SENSOR
4.5.3 HOT ROLLER STRIPPER PAWLS
4.5.4 HOT ROLLER AND FUSING LAMP
4.5.5 THERMOSWITCHES AND THERMISTOR
4.5.6 PRESSURE ROLLER
4.5.7 CHECKING THE NIP BAND
4.6 PCU AND QUENCHING LAMP
4.6.1 PCU
4.6.2 QUENCHING LAMP
4.7 EXHAUST FAN AND MAIN MOTOR
4.7.1 EXHAUST FAN
4.7.2 MAIN MOTOR
4.8 PAPER FEED
4.8.1 PAPER FEED ROLLER AND FRICTION PAD
4.8.2 PAPER END SENSOR
4.8.3 REGISTRATION SENSOR
4.8.4 BYPASS PAPER END SENSOR
4.8.5 BYPASS FEED ROLLER
4.8.6 BYPASS FEED CLUTCH AND FRICTION PAD
4.8.7 PAPER FEED AND REGISTRATION CLUTCHES
4.9 IMAGE TRANSFER
4.9.1 TRANSFER ROLLER
4.9.2 ID SENSOR AND DUPLEX ROLLER
4.9.3 DISCHARGE PLATE
4.10 BICU AND CONTROLLER BOARD
4.10.1 BICU
Preparation
Procedure
4.10.2 CONTROLLER BOARD
Preparation:
Procedure
When installing a new controller board
When replacing the NVRAM on the controller board
4.11 OTHER REPLACEMENTS
4.11.1 DUPLEX MOTOR
4.11.2 HIGH-VOLTAGE POWER SUPPLY BOARD
4.11.3 PSU
4.11.4 CONTACT-RELEASE SOLENOID
4.11.5 TONER SUPPLY CLUTCH
4.11.6 FCU
Lithium Batteries
Procedure
4.12 LASER UNIT
4.12.1 LOCATION OF THE CAUTION DECAL
4.12.2 LASER UNIT
4.12.3 LD UNIT AND POLYGON MIRROR MOTOR
4.13 ARDF
4.13.1 ARDF
4.13.2 DF REAR COVER
4.13.3 ORIGINAL FEED UNIT
4.13.4 SEPARATION ROLLER
4.13.5 DF DRIVE BOARD
4.13.6 ORIGINAL SET AND DF INVERTER SENSOR
4.13.7 DF REGISTRATION AND DF EXIT SENSOR
DF Registration Sensor Reflector
4.13.8 DF FEED MOTOR
4.13.9 DF TRANSPORT MOTOR
4.13.10 DF FEED CLUTCH
4.14 ADJUSTING COPY IMAGE AREA
4.14.1 PRINTING
Adjusting Registration
Adjusting Blank Margin
Adjusting Main-Scan Magnification
4.14.2 SCANNING
Adjusting Registration
Adjusting Magnification
Scan Auto Adjustment
4.14.3 DF IMAGE ADJUSTMENT

SYSTEM MAINTENANCE REFERENCE
5. SYSTEM MAINTENANCE REFERENCE
5.1 SERVICE PROGRAM
5.1.1 SP TABLES
5.1.2 USING SP AND SSP MODES
Starting SP Mode
Selecting Programs
Specifying Values
Activating Copy Mode
Quitting Programs/Ending (S) SP Mode
Conventions used in the tables:
5.2 USING SP MODE
5.2.1 NVRAM DATA UPLOAD/DOWNLOAD
Uploading Content of NVRAM to an SD card
Downloading an SD Card to NVRAM
5.2.2 FIRMWARE UPDATE PROCEDURE
Before You Begin
Firmware Update Procedure
5.2.3 TEST PATTERN PRINT (SP5-902-001)
Executing Test Pattern Printing
Test Patterns
5.2.4 MEMORY CLEAR
GW Machine
Exceptions
Memory Clear Procedure
5.2.5 MACHINE NO. SETTING (SP5-811-001)
Specifying Characters
GW Machine
Serial Number and NVRAM
5.2.6 SMC PRINT (SP5-990)
5.2.7 ID SENSOR ERROR ANALYSIS (SP2-221)
5.3 FAX SERVICE TABLES

TROUBLESHOOTING
6. TROUBLESHOOTING
6.1 SC TABLES
6.1.1 SUMMARY
6.1.2 ENGINE SC CODE DESCRIPTIONS
6.1.3 GW SC CODE DESCRIPTIONS
SC6xx
SC8xx
SC9xx
6.2 ELECTRICAL COMPONENT DEFECTS
6.2.1 SENSOR/SWITCH
6.2.2 BLOWN FUSE CONDITIONS
6.2.3 BICU LED DISPLAY
6.3 CARD SAVE FUNCTION
6.3.1 OVERVIEW
Card Save:
6.3.2 PROCEDURE
Error Messages
6.4 FAX TROUBLESHOOTING GUIDE

ENERGY SAVING
7. ENERGY SAVING
7.1 ENERGY SAVE
7.1.1 ENERGY SAVER MODES
Timer Settings
Recommendation
7.1.2 ENERGY SAVE EFFECTIVENESS
7.2 PAPER SAVE
7.2.1 EFFECTIVENESS OF DUPLEX/COMBINE FUNCTION
1. Duplex:
2. Combine mode:
3. Duplex + Combine:
Recommendation
Model S-C4.5
PAPER FEED UNIT PB1030 (D567)
SEE SECTION D567 FOR DETAILED TABLE OF CONTENTS

----------

Content for PARTS LIST CATALOG:
D115/D116 PARTS LOCATION AND LIST
1. Exterior (D115/D116)
2. Operation Panel (D115/D116)
3. Operation Panel GW (D115/D116)
4. By-pass Feed Unit (D115/D116)
5. Paper Registration (D115/D116)
6. Transport Section (D115/D116)
7. Paper Cassette (D115/D116)
8. ARDF 1 (D115/D116)
9. ARDF 2 (D115/D116)
10. ARDF 3 (D115/D116)
11. ARDF 4 (D115/D116)
12. ARDF 5 (D115/D116)
13. Optics Section 1 (D115/D116)
14. Optics Section 2 (D115/D116)
15. Laser Unit (D115/D116)
16. PCU Section (D115/D116)
17. Fusing Unit (D115/D116)
18. Drive Section (D115/D116)
19. Electrical Section (D115/D116)
20. Frame Section (D115/D116)
21. Extension Box (D115/D116)
22. Accessory (D115/D116)
23. Decals And Documents (D115/D116)
24. Special Tools (D115/D116)

D115/D116 PARTS INDEX
PARTS INDEX
PAPER FEED UNIT PB1030 (D567) PARTS LOCATION AND LIST
1. Paper Tray Unit 1 (D567)
2. Paper Tray Unit 2 (D567)
3. Paper Tray Unit 3 (D567)

PAPER FEED UNIT PB1030 (D567) PARTS INDEX
PARTS INDEX

D115/D116 CONTROLLER OPTIONS
(B679/B870/D577/D467/G874/M344) PARTS LOCATION AND LIST
1. Controller Options 1
2. Controller Options 2

D115/D116 CONTROLLER OPTIONS
(B679/B870/D577/D467/G874/M344) PARTS INDEX
PARTS INDEX

Number of pages: 626.