Original Factory Illustrated Service Training Manual for Linde Electric Forklift Truck 334 series.

Covered models:
E10

Included Chapters:

1 Drive - Motor
1.1 Travel motor
1.1.1 Checking and changing the carbon brushes
2 Drive - transmission
2.1 Chaning the transmission oil
2.2 Lubricating the live ring bearing
2.3 Mounting the travel motor to the transmission
2.4 Transmission assembly

3 Vehicle assembly
4 Steering system
4.1 Adjusting the steering chain tension


5 Control elements
5.1 Brake control
5.1.1 Positions of brake cylinder
5.1.2 Adjusting the brake
5.1.3 Purging the brake
5.2 Multi function handle


6 Electrical system
6.1 Block diagram E10-01 to 04/97
6.2 Digital control 1A1
6.3 Location of electrical components
6.4 Battery discharge indicator and hour meter
6.5 Charger (optional)
6.6 Universal Calibration Box UCB 95
6.6.1 Programming
6.6.2 Function Menu PROGRAM
6.6.3 Function Menu TESTER
6.6.4 Function menu SAVE
6.6.5 Function Menu RESTORE
6.6.6 Function Menu ALARM
6.6.7 Function Menu PROGRAM VACC
6.6.8 Function Menu MOTOR DATA
6.6.9 Extended Menus
6.6.10 Battery charging
6.7 A2 Logic interface
6.7.1 Fuses
6.7.2 LED's LOgic interface
6.7.3 Connectors
6.7.4 Potentiometers
6.8 A3 Logic interface
6.8.1 Connectors
6.8.2 Potentiometers
6.9 A4 Logic interface
6.10 Description of electrical system functions
6.10.1 Switch-on
6.10.2 Bleeding the hydraulic brake
6.10.3 Forward and reverse travel (FWD - RWD)
6.10.4 Lifting
6.10.5 Lowering
6.10.6 Tilting (optional)
6.10.7 Lifting and lowering the driver's platform
6.11 Wiring schematic E10 with key switch two stage
6.12 Block diagram E10-02/03, Br 334
6.13 Digital control 1a1 E10, BR 334
6.14 Position of electric components
6.15 Battery charge condition gauge and operating hour meter
6.16 Battery charger (optional equipment)
6.17 Programming
6.17.1 Programming with diagnostic unit UCB 98
6.17.1.1 Adjustment or alteration of parameters
6.17.1.2 Display of voltage values, currents, conditions of control signals
6.17.1.3 Saving complete parameter sets
6.17.1.4 Transfer of saved parameter sets
6.17.1.5 Display of error messages
6.17.1.6 Resetting the parameters to factory setting
6.17.1.7 Adjustment of multi function lever for travel
6.17.1.8 Adjustment of motor to control
6.17.1.9 Adustment of battery charger to battery
6.17.1.10 Activation of certain options
6.17.1.11 Adjustment of multi function lever "Lift - Lower"
6.17.2 Diagnostics with PC
6.17.2.1 Linde interface converter
6.17.2.2 Installation of the Diagnostic software "test & Setup"
6.17.2.3 Program Setup
6.17.2.4 Connection to vehicle
6.17.2.5 Program start Linde Program selection
6.17.2.6 Starting the Diagnostic program
6.17.2.7 The Menus
6.17.2.7.1 Main menu "file"
6.17.2.7.2 Main menu "utilities"
6.17.2.7.3 Main menu "configuration"
6.17.2.7.4 Main menu "speciaL"
6.17.3 Electric circuit diagram E10 series 334 -02/03
7 Hydraulic system
7.1 Valve block
7.1.1 Adjustment of pressure relief valve
7.2 Pump motor
7.3 Hydraulic diagram
7.4 Hydraulic functions
7.4.1 Releasing the brake
7.4.2 Lifting
7.4.3 Lowering
7.4.4 Tilting forward
7.4.5 Tilting back
7.4.6 Platform up
7.4.7 Platform Down
7.4.8 Side shift (option)
7.4.8.1 Function side shift right
7.4.8.2 Function side shift left


Format: PDF, 150 pages