Service Manual & Parts List Canon iPF6350, iPF6300, iPF6300s, iPF6200, iPF6100, iPF6000s;
This service manual, is the full Canon iPF6350, iPF6300, iPF6300s, iPF6200, iPF6100, iPF6000s Service Repair Manual.
This manual, Canon iPF6350, iPF6300, iPF6300s, iPF6200, iPF6100, iPF6000s, is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Canon iPF6350, iPF6300, iPF6300s, iPF6200, iPF6100, iPF6000s copier.
You can print, zoom or read any diagram, picture or page from this Service Manual. Every chapter on this manual is fully detailed and contain all the simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Canon iPF6350, iPF6300, iPF6300s, iPF6200, iPF6100, iPF6000s photocopier. You can find easily everything what do you need.
To see what contain, please read table of contents:

Content SERVICE MANUAL:
Chapter 1. PRODUCT DESCRIPTION
1.1 Product Overview
1.1.1 Product Overview
1.1.2 Product Overview
1.1.3 Product Overview
1.1.4 Product Overview
1.1.5 Product Overview
1.2 Features
1.2.1 Features
1.2.2 Features
1.2.3 Features
1.2.4 Features
1.2.5 Features
1.2.6 Features
1.2.7 Printhead
1.2.8 Ink Tank
1.2.9 Ink Tank
1.2.10 Cutter
1.2.11 Roll Feed Unit
1.2.12 Stand
1.2.13 Hard Disk Drive
1.2.14 Hard Disk Drive
1.2.15 IEEE1394 (FireWire) Board
1.2.16 Consumables
1.2.17 Consumables
1.2.18 Consumables
1.2.19 Consumables
1.3 Product Specifications
1.3.1 Product Specifications
1.3.2 Product Specifications
1.3.3 Product Specifications
1.3.4 Product Specifications
1.3.5 Product Specifications
1.3.6 Product Specifications
1.4 Detailed Specifications
1.4.1 Print Speed and Direction
1.4.2 Interface Specifications
1.4.3 Interface Specifications
1.4.4 Interface Specifications
1.5 Names and Functions of Components
1.5.1 Front
1.5.2 Front
1.5.3 Rear
1.5.4 Rear
1.5.5 Top Cover (Inside)
1.5.6 Top Cover (Inside)
1.5.7 Manual Loading Area
1.5.8 Manual Loading Area
1.5.9 Roll Feed Unit Cover (Inside)
1.5.10 Roll Feed Unit Cover (Inside)
1.5.11 Carriage
1.5.12 Inside
1.5.13 Inside
1.6 Basic Operation
1.6.1 Operation Panel
1.6.2 Operation Panel
1.6.3 Main Menu
1.6.4 Display
1.6.5 Main Menu
1.6.6 Main Menu
1.6.7 Menu
1.6.8 Menu
1.7 Safety and Precautions
1.7.1 Safety Precautions
1.7.1.1 Moving Parts
1.7.1.2 Adhesion of Ink
1.7.1.3 Electric Parts
1.7.1.4 Electric Parts
1.7.2 Other Precautions
1.7.2.1 Printhead
1.7.2.2 Printhead
1.7.2.3 Ink Tank
1.7.2.4 Handling the Printer
1.7.2.5 Handling the Printer
1.7.3 Precautions When Servicing Printer
1.7.3.1 Notes on the Data Stored in the Printer
1.7.3.2 Confirming the Firmware Version
1.7.3.3 Precautions against Static Electricity
1.7.3.4 Precautions for Disassembly/Reassembly
1.7.3.5 Self-diagnostic Feature
1.7.3.6 Disposing of the Lithium Battery

Chapter 2. TECHNICAL REFERENCE
2.1 Basic Operation Outline
2.1.1 Printer Diagram
2.1.2 Printer Diagram
2.1.3 Printer Diagram
2.1.4 Printer Diagram
2.1.5 Printer Diagram
2.1.6 Printer Diagram
2.1.7 Print Signal Sequence
2.1.8 Print Signal Sequence
2.1.9 Print Signal Sequence
2.1.10 Print Driving
2.1.11 Print Driving
2.1.12 Print Driving
2.2 Firmware
2.2.1 Operation Sequence at Power-on
2.2.2 Operation Sequence at Power-off
2.2.3 Print Control
2.2.4 Print Position Adjustment Function
2.2.5 Head Management
2.2.6 Printhead Overheating Protection Control
2.2.7 Pause between Pages
2.2.8 White Raster Skip
2.2.9 Sleep Mode
2.2.10 Hard Disk Drive
2.3 Printer Mechanical System
2.3.1 Outline
2.3.1.1 Outline
2.3.2 Ink Passage
2.3.2.1 Ink Passage
2.3.2.2 Ink Tank Unit
2.3.2.3 Carriage Unit
2.3.2.4 Printhead
2.3.2.5 Purge Unit
2.3.2.6 Maintenance Cartridge
2.3.2.7 Air Flow
2.3.3 Paper Path
2.3.3.1 Outline
2.3.3.2 Paper Path
2.3.3.3 Cutter Unit
2.4 Printer Electrical System
2.4.1 Outline
2.4.1.1 Overview
2.4.1.2 Overview
2.4.1.3 Overview
2.4.1.4 Overview
2.4.1.5 Overview
2.4.2 Main Controller
2.4.2.1 Main controller PCB components
2.4.2.2 Main controller PCB components
2.4.2.3 Main controller PCB components
2.4.2.4 Main controller PCB components
2.4.2.5 Main controller PCB components
2.4.2.6 Main controller PCB components
2.4.2.7 HDD expansion PCB components
2.4.3 Carriage Relay PCB
2.4.3.1 Carriage PCB components
2.4.4 Motor Driver
2.4.4.1 Roll feed unit PCB components
2.4.5 Maintenance Cartridge Relay PCB
2.4.5.1 Maintenance cartridge relay PCB components
2.4.6 Power Supply
2.4.6.1 Power supply block diagram
2.5 Detection Functions with Sensors
2.5.1 Sensors for covers
2.5.2 Ink passage system
2.5.3 Ink passage system
2.5.4 Ink passage system
2.5.5 Ink passage system
2.5.6 Carriage system
2.5.7 Paper path system
2.5.8 Paper path system
2.5.9 Others

Chapter 3. INSTALLATION
3.1 Installation
3.1.1 Making Pre-Checks
3.1.1.1 Making Pre-Checks
3.1.2 Unpacking and Installation
3.1.2.1 Unpacking and Installation
3.1.2.2 Installing the Stand
3.1.3 Checking the Images/Operations
3.1.3.1 Checking the Image and Operation
3.2 Transporting the Printer
3.2.1 Transporting the Printer
3.2.1.1 Transporting the Printer
3.2.1.2 Transporting the Printer
3.2.2 Reinstalling the Printer
3.2.2.1 Reinstalling the Printer

Chapter 4. DISASSEMBLY/REASSEMBLY
4.1 Service Parts
4.1.1 Service Parts
4.2 Disassembly/Reassembly
4.2.1 Disassembly/Reassembly
4.3 Points to Note on Disassembly and Reassembly
4.3.1 Note: Items that should never be disassembled
4.3.2 Moving the carriage manually
4.3.3 Units requiring draining of ink
4.3.4 External Covers
4.3.5 Driving Unit
4.3.6 Cutter
4.3.7 Cutter
4.3.8 Carriage Unit
4.3.9 Carriage Unit
4.3.10 Feeder Unit
4.3.11 Feeder Unit
4.3.12 Roll Feed Unit
4.3.13 Purge Unit
4.3.14 Waste Ink Collection Unit
4.3.15 Ink Tank Unit
4.3.16 Ink Tank Unit
4.3.17 Head Management Sensor
4.3.18 Multi Sensor
4.3.19 Multi Sensor
4.3.20 PCBs
4.3.21 PCBs
4.3.22 PCBs
4.3.23 Opening the Cap/Moving the Wiper Unit
4.3.24 Opening the Cap/Moving the Wiper Unit
4.3.25 Opening/Closing the Ink Supply Valve
4.3.26 Draining the Ink
4.4 Applying the Grease
4.4.1 Applying the Grease
4.5 Adjustment and Setup Items
4.5.1 Adjustment Item List
4.5.2 Adjustment Item List
4.5.3 Procedure after Replacing the Carriage Unit or Multi Sensor
4.5.4 Procedure after Replacing the Carriage Unit or Multi Sensor
4.5.5 Procedure after Replacing the Head Management Sensor

Chapter 5. MAINTENANCE
5.1 Periodic Replacement Parts
5.1.1 Periodic Replacement Parts
5.2 Consumable Parts
5.2.1 Consumable Parts
5.2.2 Consumable Parts
5.2.3 Consumable Parts
5.2.4 Consumable Parts
5.3 Periodic Maintenance
5.3.1 Periodic Maintenance
5.3.2 Periodic Maintenance
5.3.3 Periodic Maintenance

Chapter 6. TROUBLESHOOTING
6.1 Troubleshooting
6.1.1 Outline
6.1.1.1 Outline of Troubleshooting
6.1.2 Troubleshooting When Warnings Occur
6.1.2.1 Ink Lvl: Chk XX (1000,1001,1002,1003,1004,1005,1006,1008,1009,100A,100B,100C)
6.1.2.2 MTCart Full Soon (1100)
6.1.2.3 Mist Full Soon (1101)
6.1.2.4 GARO W12xx: xx stands for digits (1221,1222,1223,1225,1231,1232,1233,1234,1235)
6.1.2.5 Feed Limit
6.1.2.6 Check printed document.(1010)
6.1.3 Troubleshooting When Errors Occur
6.1.3.1 01800500-1012/01800500-1013 Defective printhead nozzle
6.1.3.2 03010000-200C/03010000-2017/03010000-2018/03016000-2010 Multi sensor error
6.1.3.3 03010000-200D Cut sheet end cannot be detected
6.1.3.4 03010000-2820/03010000-2821/03010000-2822/03010000-2823/03130031-2F32/03010000-2F33 Adjustment error
6.1.3.5 03010000-2E1F/03060000-2E14/03061000-2E15/03060000-2E16/03060200-2E03/03060200-2E0B/03060A00-2E00/
03060A00-2E01/03860002-2E0A Path mismatch error
6.1.3.6 03010000-2E25/03010000-2E27 Paper feed/delivery jam error
6.1.3.7 03030000-2E21 IEEE1394 error
6.1.3.8 03060A00-2E0E Roll media unit uninstallation
6.1.3.9 03060A00-2E1B Roll media end error
6.1.3.10 03130031-291B Lift home position error
6.1.3.11 03130031-291D Supr cam sensor error
6.1.3.12 03130031-2E23 Cutter unit breakdown
6.1.3.13 03130031-2F13 A/D Converter external trigger output stopped
6.1.3.14 03130031-2F14 ASIC Register cannot be written
6.1.3.15 03130031-2F16 Mist fan error
6.1.3.16 03130031-2F17 Suction fan error
6.1.3.17 03130031-2F20/03130031-2F28/03130031-2F22/03130031-2F23 Defective sensor in purge unit
6.1.3.18 03130031-2F24 Cutter drive time-out error
6.1.3.19 03130031-2F25 Carriage home position error
6.1.3.20 03130031-2F26/03130031-2F27 Carriage motor error
6.1.3.21 03130031-2F2A Feed roller home position error
6.1.3.22 03130031-2F2D The cassette cannot work
6.1.3.23 03130031-2F2E Roll drive time-out error
6.1.3.24 03130031-2F3A Valve open/close error
6.1.3.25 03180003-2E22 MIT error
6.1.3.26 03180101-2E17 Cassette uninstallation
6.1.3.27 03800200-2802/03800400-2803/03800300-2801/03800201-280A/03800401-280B/03800301-2809/03800200-2804/
03800202-2807 Printhead error
6.1.3.28 03810101-2501/03810102-2502/03810103-2503/03810104-2500/03810105-2508/03810106-2506/03810107-250A/
03810108-250C/03810109-250B/03810112-2504/03810113-2505/03810115-2509 No ink error
6.1.3.29 03830101-2521/03830104-2520/03830102-2522/03830103-2523/03830112-2524/03830113-2525/03830106-2526/
03830105-2528/03830115-2529/03830107-252A/03830109-252B/03830108-252C Ink tank is not installed.(This error occurs when
the ink tank is replaced.)
6.1.3.30 03830201-2541/03800204-2540/03830202-2542/03830203-2543/03830212-2544/03830213-2545/03830206-2546/
03830205-2548/03830215-2549/03830207-254A/03830209-254B/03830208-254C Invalid ink tank ID
6.1.3.31 03830301-2561/03830304-2560/03830302-2562/03830303-2563/03830312-2564/03830313-2565/03830306-2566/
03830305-2568/03830305-2568/03830315-2569/03830307-256A/03830309-256B/03830308-256C Ink tank EEPROM error
6.1.3.32 03841001-2819/03841201-2816/03841201-2817/03841101-2818/01841001-281B Maintenance cartridge error
6.1.3.33 03861001-2405/03861001-2406 Borderless printing error
6.1.3.34 03862000-2E09 Insufficient roll media error
6.1.3.35 03870001-2015 Cut error
6.1.4 Troubleshooting When Service Call Errors Occur
6.1.4.1 Outline
6.1.4.2 E141-4046 Recovery system rotation count reached 50,000
6.1.4.3 E144-4047 Supply system's count error
6.1.4.4 E146-4001 Borderless/idle ejection/mist collection count full
6.1.4.5 E194-404A Non-discharge detection count error
6.1.4.6 E196-4040/E196-4041/E196-4042/E196-4045/E196-4049 main controller PCB error
6.1.4.7 E198-401C/E198-401D/E198-401E RTC error
6.2 Location of Connectors and Pin Arrangement
6.2.1 Main controller PCB
6.2.2 Main controller PCB
6.2.3 Main controller PCB
6.2.4 Main controller PCB
6.2.5 Main controller PCB
6.2.6 Carriage PCB
6.2.7 Power supply
6.2.8 Power supply
6.2.9 Roll feed unit PCB
6.3 Version Up
6.3.1 Firmware Update Tool
6.3.2 Firmware Update Tool
6.4 Service Tools
6.4.1 Tool List

Chapter 7. SERVICE MODE
7.1 Service Mode
7.1.1 Service Mode Operation
7.1.2 Service Mode Operation
7.1.3 Map of the Service Mode
7.1.4 Map of the Service Mode
7.1.5 Map of the Service Mode
7.1.6 Map of the Service Mode
7.1.7 Map of the Service Mode
7.1.8 Details of Service Mode
7.1.9 Details of Service Mode
7.1.10 Details of Service Mode
7.1.11 Details of Service Mode
7.1.12 Details of Service Mode
7.1.13 Sample Printout
7.1.14 e-Maintenance/imageWARE Remote
7.1.15 Viewing PRINT INF
7.1.16 Viewing PRINT INF
7.2 Special Mode
7.2.1 Special Modes for Servicing
7.2.2 Special Modes for Servicing

Chapter 8. ERROR CODE
8.1 Outline
8.1.1 Outline
8.1.2 Outline
8.2 Warning Table
8.2.1 Warnings
8.2.2 Warnings
8.2.3 Warnings
8.3 Error Table
8.3.1 Error Code List
8.3.2 Error Code List
8.3.3 Errors
8.4 Sevice Call Table
8.4.1 Service Call Errors
8.4.2 Service Call Errors
8.4.3 Service Call Errors

-------------------------

Content PARTS LIST Canon iPF6350 iPF6300 iPF6300S iPF6200 iPF6100 iPF600S iPF605:
PRINTER & ACCESSORIES
ROLL UNIT
COVERS (1)
COVERS (2)
ELECTRICAL PART
PURGE UNIT
CUTTER UNIT
INK SUPPLY UNIT
LINEAR SCALE & LIFT DRIVE UNIT
CARRIAGE UNIT
CARRIAGE & FEED MOTOR UNIT
PINCH ROLLER UNIT
AIR FLOW FAN UNIT
PLATEN & SPUR UNIT
TOOL
STAND UNIT
MECHANICAL STANDARD PARTS(HOW TO USE)
MECHANICAL STANDARD PARTS(SCREWS)
MECHANICAL STANDARD PARTS(BOLTS)
MECHANICAL STANDARD PARTS(NUTS)
MECHANICAL STANDARD PARTS(RETAINING RINGS)
Number of pages: 762.