KPA37SMAOMM Komatsu Pc300 7 Pc350 7 Operation Maintenance Manual.pdf

This is a COMPLETE Service Shop Repair Manual for the KOMATSU PC300-7, PC300LC-7, PC350-7, PC350LC-7 HYDRAULIC EXCAVATOR. This manual contains deep information about maintaining, assembly, disassembly and servicing your KOMATSU PC300-7, PC300LC-7, PC350-7, PC350LC-7 HYDRAULIC EXCAVATOR.

MACHINE MODEL SERIAL NUMBER
PC300-7 - 40001 and up
PC300LC-7 - 40001 and up
PC350-7 - 20001 and up
PC350LC-7 - 20001 and up

PC300, 300LC, PC350, 350LC-7 mount the SAA6D114E engine.
For details of the engine, see the 114 Series Engine Shop Manual.

SERVICE REPAIR MANUAL CONTENTS:
=========
SAFETY
FOREWORD
10 STRUCTURE AND FUNCTION
20 TESTING AND ADJUSTING
30 DISASSEMBLY AND ASSEMBLY
40 MAINTENANCE STANDARD

OPERATION & MAINTENANCE MANUAL CONTENTS:
=========
1. FOREWORD
2. SAFETY INFORMATION
3. INTRODUCTION
3.1 INTENDED USE
3.2 FEATURES
3.3 BREAKING IN THE MACHINE
4. LOCATION OF PLATES, TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
4.1 MACHINE SERIAL NO. PLATE POSITION
4.2 ENGINE SERIAL NO. PLATE POSITION
4.3 TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
5. CONTENTS
SAFETY
6. GENERAL PRECAUTIONS
7. PRECAUTIONS DURING OPERATION
8. PRECAUTIONS FOR MAINTENANCE
9. POSITION FOR ATTACHING SAFETY LABELS
OPERATION
10. GENERAL VIEW
11. EXPLANATION OF COMPONENTS
12. OPERATION
13. TRANSPORTATION
14. COLD WEATHER OPERATION
15. LONG-TERM STORAGE
16. TROUBLESHOOTING
MAINTENANCE
17. GUIDES TO MAINTENANCE
18. OUTLINES OF SERVICE
19. WEAR PARTS LIST
https://www.tradebit.com OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
21. STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS
22. PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
23. MAINTENANCE SCHEDULE CHART
24. SERVICE PROCEDURE
SPECIFICATIONS
25. SPECIFICATIONS
OPTIONS, ATTACHMENTS
26. GENERAL PRECAUTIONS
27. HANDLING BUCKET WITH HOOK
28. USING SEAT BELT
29. HANDLING CAR COOLER
30. HANDLING AIR CONDITIONER
31. OPERATION OF ATTACHMENTS
32. INTRODUCTION OF ATTACHMENTS
33. EXTENDING MACHINE SERVICE LIFE
LOADING SHOVEL
34. GENERAL LOCATIONS
35. INSTRUMENTS AND CONTROLS
36. PRECAUTIONS FOR MACHINE OPERATION
37. MAINTENANCE
38. TRANSPORTATION
39. SPECIFICATIONS