CONTENTS
1 GENERAL INFORMATION
1.1 INTRODUCTION 1-1
1.2 DESCRIPTION OF SAILOR HF SSB PROGRAMME 1-1
1.3 GENERAL DESCRIPTION OF SAILOR HF SSB RE2100 1-2
1.4 TECHNICAL DATA
(complies with SOLAS, ITU, CEPT, MPT, DOC, FTZ, KSR, FCC) 1-3
1.5 CONTROLS 1-5
1.6 PRINCIPLE OF OPERATION 1-7
2 INSTALLATION
2.1 MOUNTING POSSIBILITIES 2-1
2.2 DIMENSIONS AND DRILLING PLAN 2-3
2.3 ELECTRICAL CONNECTION AND ASSEMBLING 2-8
3 SERVICE
3.1 MAINTENANCE 3-1
3.2 ALIGNMENT INSTRUCTIONS 3-1
3.3 PROPOSAL FOR NECESSARY TEST EQUIPMENT 3-2
3.4 TROUBLE SHOOTING 3-7
3.5 PERFORMANCE CHECK 3-9
3.6 MODULE PERFORMANCE CHECK 3-21
3.7 ADJUSTMENT PROCEDURE 3-47
3.8 NECESSARY ADJUSTMENT AND CHECK AFTER REPAIR 3-56
3.9 FUNCTION CHECK 3-58
3.10 SELECTION AND DESCRIPTION OF THE SERVICE PROGRAMMES
4 MECHANICAL DISASSEMBLING AND MODULE LOCATION
4.1 ADJUSTMENTS AND LOCATIONS 4-1
5 CIRCUIT DESCRIPTION AND SCHEMATIC DIAGRAMS
5.1 RECEIVER UNIT (MODULE 1) PART NO. 625631 5-1
5.2 FRONT END UNIT (MODULE 2) PART NO. 625632 5-9
5.3 SYNTHESIZER UNIT (MODULE 3) PART NO. 625633 5-13
5.4 EXCITER UNIT (MODULE 4) PART NO. 625634 5-23
5.5 PROCESSOR UNIT (MODULE 5) PART NO. 625635 5-29
5.6 KEYBOARD UNIT (MODULE 6) PART NO. 625636 5-35
5.7 DISPLAY UNIT (MODULE 7) PART NO. 625637 5-37
5.8 POWER UNIT (MODULE 8) PART NO. 625638 5-41
5.9 INTERCONNECTION CABLE PLAN 5-45
6 MICROTELEPHONE INSTALLATION
6.1 NORMAL INSTALLATION RE2100 AND C2140 6-3
6.2 NORMAL INSTALLATION RE2100 OR C2140 WITH
2 MICRO TELEPHONES 6-4
6.3 MECHANICAL DIMENSIONS FOR HANDSET 6-5
7 PARTS LIST