Sears Craftsman 171.25450 Owner's Manual

CRAFT$1VlAK
INDUSTRIAL
DOVETAIL
FIXTURE
Assembly
Operation
iMPORTANT;Thefollowingrouterbitsarerequired
for usewith this fixture:#25414-1/4-in. Straight Router Bit and
#25415-9/16-in. Dovetail Router Bit which are used
for THROUGHor OPENJOINTS.
: #25505 or #26318-1/2-in. DovetailRouterBit which
are usedfor a!l HALFBLINDJOINTS.









Safety Information
Unpacking and Checking Contents
Assembly of the Right Side Template Support to the Dovetail Base
Assembly of the Top Clamping Bar to the Dovetail Base
Assembly of the Cam Handles and Pivot Shaft to the Dovetail Base
Assembly of the Front Clamping Bar to the Dovetail Base
Assembly of the Front Stop Blocks to the Dovetail Base
Assembly of the Top Stop Blocks to the Dovetail Base
Assembly of the Clamping Knobs to the Dovetail Base
Assembly of the Templates
Alignment of the Templates
Assembly of a Guide Bushing to the Router
Assembly for Sears Routers with Three Hole Baseplates
Assembly for Sears 1/2" Shank Industrial Routers
Installation Instructions
Using the Dovetail Fixture
Half Blind Flush Joint
Half Blind Flush Offset Joint
Half Blind Rabbeted Joint
Open or through Joint
Adjusting the Depth-Of-Cut of the Router Bit
Adjusting Thedepth-Of-Cut
Clamping the Workpieces to the Dovetail Base
Making Drawers with Half Blind Flush Joints
Making Drawers with Half Blind Flush Offset Joints
Making Drawers with Half Blind Rabbeted Joints
Troubleshooting
Making Projects with Open (Through) Flush Joints
Procedure for Cutting the Project Front and Back
Parts List for Industrial Dovetail Fixture
Parts View